I have a version of Pibero's code up and running for the Run-11 transverse jet trees (see this post). As a first look, I have run over the jet trees for run 12046105. I select triggers for JP0, JP1, JP2*L2JetHigh, AJP, and VPDMB. I use the following definitions:

• VPDMB
  • VPDMB trigger fired and p_{T, jet} > 5.0 GeV
• JP0
  • JP0 trigger fired and p_{T, jet} > 7.1 GeV
• JP1
  • JP1 trigger fired, JP0 trigger did not fire, and p_{T, jet} > 9.9 GeV
• JP2
  • JP2 trigger fired, JP1 trigger did not fire, JP0 trigger did not fire, and p_{T, jet} > 16.3 GeV
• AJP
  • AJP trigger fired, JP2 trigger did not fire, JP1 trigger did not fire, JP0 trigger did not fire, and p_{T, jet} > 16.3 GeV

I have not implemented a fiducial volume cut, here, on either detector η or jet η. Also, I have not enforced a requirement on summed track p_T. I have enforced a requirement that R_T < 0.98.

Figure 1: Jet Transverse Momentum

In Fig. 1 I plot the raw p_T spectra for the various triggers. On the left, I plot the p_T for all jets if the particular trigger fired. On the right, I plot the p_T with a requirement for the above definitions and a matching to a trigger patch. The exception is for VPDMB where I simply enforce the p_T cut and demand the VPDMB trigger fired.