EEMC
Comparison of old (Run 7) to new (Run 8) EEMC tower HV's
At the end of run 7, we compared slopes for all EEMC towers with two sets of HV values in a series of consecutive runs. The goal was to see if the new HV set would change the slopes in the 'e
Run 10 EEMC Calibrations
Updated on Mon, 2010-05-31 14:36. Originally created by stevens4 on 2010-05-31 14:36. Under:slow controls archive viewer
Updated on Tue, 2010-01-19 12:17. Originally created by sowinski on 2010-01-19 11:36. Under:There is a viewer for slow controls quantities documented at
Log of tower base and fee issues
Updated on Tue, 2009-12-22 12:24. Originally created by sowinski on 2009-12-22 12:24. Under:Attached is a text file of tower base and other issues. I went back through the electronic shift log and recorded all the bases that had been replaced and recording of other fixes and problem
Endcap Geometry update (2009)
Updated on Tue, 2009-11-10 13:25. Originally created by seluzhen on 2009-11-09 11:40. Under:EEMC geometry v6.0
Proposed name for the geometry file: pams/geometry/ecalgeo/ecalgeo1.g
List of changes
ESMD (Shower Max and Pre- & Post-Shower Detectors)
Updated on Sun, 2009-11-01 18:45. Originally created by wwjacobs on 2009-11-01 17:53. Under:ETOW (Towers)
Updated on Sun, 2009-11-01 18:43. Originally created by wwjacobs on 2009-11-01 17:50. Under:EEMC Maintenance/Operations Documents
Updated on Sun, 2009-11-01 17:38. Originally created by wwjacobs on 2009-11-01 17:38. Under:Endcap Geometry
Updated on Tue, 2009-10-13 12:27. Originally created by seluzhen on 2009-10-13 10:53. Under:Geometry definition
- Detailed description of the geometry (ver 5.1) as implemented by
EEMC Gains - corrected for mis-set TCD phase
Updated on Tue, 2009-09-01 09:04. Originally created by stevens4 on 2009-08-31 15:45. Under:EEMC TCD Phase and Effective Gains
eemc as-built info and proto tests
Updated on Sat, 2009-09-05 16:30. Originally created by wwjacobs on 2009-08-25 12:45. Under:Here starts 8/09 a collection of misc. information re: as-built eemc from construction documentation and prototype testing of various sorts.
... to be detailed
Run 8 EEMC calibrations
Updated on Wed, 2009-07-29 10:43. Originally created by stevens4 on 2009-07-29 10:43. Under:This is the main page for all EEMC calibration information for Run 8
EEMC Pedestals and Status Tables for Run 9
Updated on Fri, 2009-08-07 09:06. Originally created by stevens4 on 2009-07-28 16:14. Under:Run 9 EEMC Pedestals and Status Tables
ESMD (MAPMT FEE) Timing for Run 9
Updated on Mon, 2009-12-21 18:30. Originally created by wwjacobs on 2009-03-23 10:53. Under:The timing scans for ESMD/MAPMT FEE for Run 9 were taken by
raising the box delay settings as far as feasible, staying
Run 9 EEMC calibrations
Updated on Thu, 2009-03-19 17:42. Originally created by wissink on 2009-03-19 17:03. Under:This is the main page for all EEMC calibration information for Run 9
Overview for generating EEMC pedestals and status tables
Updated on Tue, 2008-07-22 13:13. Originally created by wissink on 2008-07-22 13:13. Under:This is an informal overview of the 'philosophy' used to generate pedestals and status tables for the STAR endcap EMC, a
2007 EEMC Tower Gains
Updated on Tue, 2008-06-24 12:58. Originally created by wissink on 2008-06-23 17:01. Under:
EEMC Pedestals and Status Tables for Run 8
Updated on Wed, 2009-07-29 10:45. Originally created by stevens4 on 2008-05-06 14:13. Under:Generating Pedestal and Status Table Information
Calibrations
Updated on Tue, 2008-05-06 14:01. Originally created by stevens4 on 2008-05-06 14:01. Under:New EEMC Calibrations Page