- BEMC
- BTOF
- DAQ
- Detector Upgrades
- EEMC
- EPD
- 2017 cosmic ray tests at OSU and BNL
- Calibrations
- EPD Meetings
- EPD Slow-Control Manual
- EPD-GSTAR
- IV Scan
- Individual's pages
- Known issues and problems
- Mapping
- Offline DataBase
- Operations 2017
- Operations 2018
- Operations 2019
- Operations 2024
- Software
- Start-of-run EPD tasks and instructions
- Useful EPD documents
- Useful Links
- ETOF
- FCS
- FGT
- FPD & FMS & FPS
- FTPC
- FTT
- HFT
- HLT
- L3
- MTD
- MTD NPS Maps
- PMD
- PP2PP
- RICH
- Roman Pot Phase II*
- Run-18 calibrations
- SSD
- SVT
- Slow Controls
- TPC
- TRG
- Trigger Detectors
- VPD
- test
Clear Fiber Bundle Health/Status
Updated on Thu, 2018-01-25 14:51. Originally created by ewigleben on 2018-01-24 10:32.
Under:
A summary of all of the testing results of the Clear Fiber bundles since the start.
Criteria for passing (somewhat arbitrary, but based on results from the 3 bundles used in Run 17 that were deemed "good"):
Bundles to use in Run 18:
Failing Bundles that can still be used in Run 18 in an emergency:
Bundle Under Construction: FB25 (Broken splitter; construction not completed, but can be fixed and polished for the future if needed)
In summary, at the moment we have:
Google Spreadsheets for posterity:
Fiber by Fiber testing of every bundle: https://docs.google.com/spreadsheets/d/1rs-XOkZjJQz_nzMzTgH1vVVI4Ck12OCSJ_Dc_WHTaK8/edit#gid=0
Fiber Bundle Status Summary: https://docs.google.com/spreadsheets/d/1u5dWDUeguvjiPTBiH32b--NCzr-gS7l-ocCTeo5hBF0/edit#gid=0
Criteria for passing (somewhat arbitrary, but based on results from the 3 bundles used in Run 17 that were deemed "good"):
- Average transmission of above -65%
- No single fiber in a bundle has transmission below -75%
Bundles to use in Run 18:
FB# | Status | Comments | Average | Max | Full Sheet |
1 | Healthy | First bundle; repolished twice | -63% | -68% | FB01 |
2 | Healthy | Results from 2nd test; avg unchanged from first test | -55% | -62% | FB02 |
3 | Healthy | -54% | -67% | FB03 | |
4 | Healthy | -63% | -73% | FB04 | |
5 | Healthy | -62% | -71% | FB05 | |
6 | Healthy | Repolished once | -62% | -68% | FB06 |
7 | Healthy | -61% | -73% | FB07 | |
8 | Healthy | Repolished 3 times | -63% | -72% | FB08 |
9 | Healthy | -64% | -71% | FB09 | |
10 | Healthy | -62% | -68% | FB10 | |
11 | Healthy | -62% | -73% | FB11 | |
13 | Healthy | Repolished 3 times | -64.8% | -73% | FB13 |
14 | Healthy | -62% | -73% | FB14 | |
15 | Healthy | -62% | -73% | FB15 | |
16 | Healthy | -62% | -73% | FB16 | |
17 | Healthy | -63% | -70% | FB17 | |
18 | Healthy | -61% | -69% | FB18 | |
19 | Healthy | -63% | -68% | FB19 | |
20 | Healthy | Repolished twice | -64% | -69% | FB20 |
21 | Healthy | -64% | -72% | FB21 | |
23 | Healthy | Repolished once | -63% | -72% | FB23 |
24 | Healthy | -63% | -74.6% | FB24 | |
26 | Healthy | -62% | -66% | FB26 | |
27 | Healthy | -57% | -68% | FB27 |
Failing Bundles that can still be used in Run 18 in an emergency:
FB# | Status | Comments | Average | Max | Full Sheet |
22 | Injured | Failing upon retest. Not sure what's going on | -61% | -77% | FB22 |
12 | Injured | Single fiber glows on both ends, possibly cracked | N/A | N/A | N/A |
28 | Injured | Failing final test. Also even/odd difference of 6% | -61% | -78% | FB28 |
Bundle Under Construction: FB25 (Broken splitter; construction not completed, but can be fixed and polished for the future if needed)
In summary, at the moment we have:
- 24 Passing Bundles (FB1-FB11, FB13-FB21, FB23-FB24, FB26-FB27)
- 3 Failing Bundles (FB28 has a fiber at -78%; FB12 has a fiber glowing on either end, so it was set aside. Has never been fully tested, but the glowing fiber was actually passing testing; FB22 failing upon retest; 2 fibers below -75%)
- 1 Incomplete bundle (FB25 had a tube splitter that broke. It can be fixed, polished and used, but of course should only be used as a last resort)
Google Spreadsheets for posterity:
Fiber by Fiber testing of every bundle: https://docs.google.com/spreadsheets/d/1rs-XOkZjJQz_nzMzTgH1vVVI4Ck12OCSJ_Dc_WHTaK8/edit#gid=0
Fiber Bundle Status Summary: https://docs.google.com/spreadsheets/d/1u5dWDUeguvjiPTBiH32b--NCzr-gS7l-ocCTeo5hBF0/edit#gid=0
»
- Printer-friendly version
- Login or register to post comments